Milling cutter B6 with battery - 35,000 rpm.
Milling cutter B6 with battery - 35,000 rpm.
Milling cutter B6 with battery - 35,000 rpm.
Milling cutter B6 with battery - 35,000 rpm.
Milling cutter B6 with battery - 35,000 rpm.
Milling cutter B6 with battery - 35,000 rpm.
Milling cutter B6 with battery - 35,000 rpm.
Milling cutter B6 with battery - 35,000 rpm.

emmi-nail

Milling cutter B6 with battery - 35,000 rpm.

279,00 € 349,00 €
Save 20%

Tax included. Shipping calculated at checkout

SKU: 18650
Quantity:
Kostenloser Versand in DE ab 49 € Sofort lieferbar
Highlights
  • ✔Studio quality
  • ✔Battery operated
  • ✔Powerful 35,000 revolutions
  • ✔Ideal for removing gel and acrylic
  • ✔Right/left rotation

B6 Nail Drill with Battery - ideal for professional work in the nail studio

The professional cordless nail drill is extremely lightweight, and thanks to the included lithium-ion battery, it can be used for both mobile work and at your nail desk in the studio. You will also be impressed by the low-vibration and very quiet handpiece. This high-performance cordless drill is designed for manicures and pedicures specifically for professionals, as this nail drill is particularly powerful with a high number of revolutions per minute. This ensures that even stubborn nail modeling can be processed without much effort.


✔ Studio quality
✔ Battery-operated
✔ Powerful 35,000 revolutions
✔ Ideal for removing gel and acrylic
✔ Clockwise/counter-clockwise rotation
✔ Quick-release system for fast bit changes


➠User manual


Technical data:

  • Handpiece size: 133mm, Ø19mm
  • Control unit size (LxWxH): 131 x 76 x 27 mm
  • Lithium-ion battery: 2500 mAh
  • Handpiece weight: 170g
  • Control unit weight: 393g
  • Revolutions: max. 35,000 rpm
  • Wattage: 48 watts
  • Power supply: AC 220/240 V
  • Mains frequency: 50/60 Hz

 

Included in the scope of delivery: 

  • Control unit
  • Handpiece
  • Handpiece holder
  • Belt clip
  • Handle holder
  • Power supply unit

Changing a bit on a nail drill:

  1. Disconnect the device from the power supply
    Unplug or remove the battery.
  2. Rotate the quick-release lock
    Turn the handpiece at the quick-release lock clockwise (overcome the noticeable resistance).
  3. Pull out the old bit
    Carefully pull it out of the collet.
  4. Insert the new bit
    Insert up to approx. 2–4mm before the stop (not all the way to the stop).
  5. Tighten the quick-release lock
    Turn the handpiece at the quick-release lock counter-clockwise.
  6. Check the fit
    Check for a secure fit.

⚠️ Afterward, reconnect the device and perform a short test run. 

WEEE Reg. No. DE65313320